Lapsed, fee not paid7 drawingsTools & Workshop · US 8,678,185 B1
Slot-lid tool box
A tool box with side slots and a cover that slides and locks into them.
Tools & Workshop
Hand tools, jigs, fixtures and workshop helpers. 51 patents: 33 lapsed, 11 expired at full term, 7 likely abandoned.
Patents
Lapsed, fee not paid7 drawings
Lapsed, fee not paid5 drawingsTools & Workshop · US 11,279,007 B1
Drill-powered crank handle
A telescoping hook that lets a drill turn the crank on overhead awnings and screens.
Lapsed, fee not paid9 drawingsTools & Workshop · US 9,919,415 B1
Clip-together tool cases
Storage containers that clip and lock to each other into one carry case.
Lapsed, fee not paid6 drawingsTools & Workshop · US 8,656,603 B1
Clapboard spacing gauge
A handheld gauge with flanges that sets the reveal and holds each clapboard in place while you nail it.
Lapsed, fee not paid15 drawingsTools & Workshop · US 11,253,975 B2
Positioning spring clamp
A spring clamp with a positioning set that holds work at a fixed spot while you fasten it.
Lapsed, fee not paid8 drawingsTools & Workshop · US 11,255,639 B2
Scope reticle leveler
An L-shaped tool with a sliding hammer that squares a rifle scope's reticle to the rifle.
Lapsed, fee not paid7 drawingsTools & Workshop · US 11,255,666 B1
Drill bit bubble level
A level on an offset arm with a bearing around the bit, so it stays put while the bit spins and shows if you're straight.
Lapsed, fee not paid12 drawingsTools & Workshop · US 8,615,894 B1
Picture hook marker
A squishy marker that sticks to the back of a frame at the hanger point; press the frame to the wall and it marks where to drill.
Lapsed, fee not paid12 drawingsTools & Workshop · US 8,573,413 B2
Locking tool rack
A hand-tool rack with a cover frame that locks the tools in place for display without theft.
Lapsed, fee not paid9 drawingsTools & Workshop · US 8,549,816 B2
Panel install support
A temporary bracket that holds a wall or ceiling panel on a frame while you fasten it.
Lapsed, fee not paid7 drawingsTools & Workshop · US 11,137,239 B2
Magnetic pipe square level
An angle-iron square with magnets and bubble levels that clamps onto pipe so welders and fitters can square and level in one step.
Lapsed, fee not paid6 drawingsTools & Workshop · US 11,137,274 B1
Magnetic gauge stand
A magnetic stand that sticks to equipment so an HVAC tech can hang gauges at eye level and work hands-free.
Lapsed, fee not paid16 drawingsTools & Workshop · US 8,528,152 B1
Decorative concrete edger
A trowel with several rounded profiles that presses decorative edges into fresh concrete.
Lapsed, fee not paid4 drawingsTools & Workshop · US 11,110,573 B2
Push-fit release tool
A spring-loaded clover-shaped tool that releases push-fit plumbing connectors cleanly in one squeeze.
Lapsed, fee not paid17 drawingsTools & Workshop · US 11,110,588 B1
Trestle accessory rail
Sawhorse saddles with threaded inserts so vises, clamps and holders bolt onto the trestles.
Lapsed, fee not paid14 drawingsTools & Workshop · US 11,110,589 B2
Interlocking tool holders
Tool holders with a tongue on one side and a groove on the other, so you can snap any set into one custom rack.
Expired, full term13 drawingsTools & Workshop · US 6,640,670 B2
Crank pulley holding tool
A tool that holds an engine's crankshaft pulley still while you loosen or tighten the sprocket bolt, with a square hole for a breaker bar.
Expired, full term7 drawingsTools & Workshop · US 6,564,679 B1
Appliance clutch tool
A two-handled bar with notched engaging teeth at its end that grips an appliance clutch so it can be removed and installed.
Expired, full term5 drawingsTools & Workshop · US 6,609,445 B2
Inline valve socket
An open-box socket that slides snugly over an inline pipe valve so a square-drive wrench can turn it on or off the pipe.
Likely abandoned5 drawingsTools & Workshop · US 2018/0297178 A1
Valve wheel wrench
A wrench whose angled jaws grip a valve handwheel for extra turning force.
Likely abandoned9 drawingsTools & Workshop · US 2018/0169845 A1
Washer basket puller
A threaded puller that pulls a stuck washing machine basket off its shaft.
Expired, full term5 drawingsTools & Workshop · US 6,090,204 A
Door-painting corner stands
Four clamp-on corner fixtures with handles hold a door off the surface so it can be turned and every side finished at once.
Likely abandoned9 drawingsTools & Workshop · US 2018/0104803 A1
Bike repair plate tool
A flat bicycle tool with three tool assemblies on one base plate.
Likely abandoned21 drawingsTools & Workshop · US 2017/0167643 A1
Supply-line tightening handle
A handle with two cavities that grips plumbing supply-line nuts for hand tightening in tight spots.
Likely abandoned8 drawingsTools & Workshop · US 2017/0157750 A1
Skateboard multi-tool
A skate tool whose two pieces work together to loosen several truck bolts at once.
Expired, full term1 drawingTools & Workshop · US 5,794,807 A
Evidence protection dome
A dome-shaped cover with a flanged rim and retainers that sits over a piece of evidence or other object and stays put once placed.
Likely abandoned6 drawingsTools & Workshop · US 2013/0313402 A1
Fold-in socket hanger
A hanger with a folding tongue that tucks into a socket's drive hole and clips it to a rail.
Lapsed, fee not paid6 drawingsTools & Workshop · US 9,849,553 B2
Hole-saw safety rig
A magnetic base and vacuum unit hold a drill and catch debris while cutting with a hole saw.
Lapsed, fee not paid6 drawingsTools & Workshop · US 8,596,169 B2
Fine-tooth ratchet head
A ratchet wrench whose head holds its rotating member in a toothed ring for a stronger, finer ratchet.
Lapsed, fee not paid4 drawingsTools & Workshop · US 11,185,962 B1
Self-closing ratchet ring
A torque tool whose toothed ring closes around a round object and ratchets it, like a pipe or filter.
Lapsed, fee not paid16 drawingsTools & Workshop · US 9,827,657 B1
Garbage disposal mounting tool
A tool that expands a disposal's snap ring and holds the stack of mounting parts, so one person can raise and lock them onto the sink flange.
Lapsed, fee not paid4 drawingsTools & Workshop · US 11,161,224 B2
Belt tensioner wrench
A clip-on sprocket tool that loosens a truck's belt tensioner in cramped engine bays.
Lapsed, fee not paid5 drawingsTools & Workshop · US 11,161,482 B1
Clamp-on inflation station
An air regulator, clamp and hose in one housing for inflating tires and gear from a shop compressor.
Lapsed, fee not paid13 drawingsTools & Workshop · US 11,135,704 B2
Double-clamp wrench
A wrench with two overlapping pivoting jaws that clamp around a nut from both sides.
Lapsed, fee not paid8 drawingsTools & Workshop · US 11,135,734 B1
Pivot-grip hand axe
A compact axe with a mid-grip trigger that lets it rotate in the hand, so it chops along several axes.
Lapsed, fee not paid11 drawingsTools & Workshop · US 9,776,308 B2
Reinforced adjustable wrench
An adjustable wrench with a reinforced guide and holding portion so the jaw doesn't wobble.
Lapsed, fee not paid6 drawingsTools & Workshop · US 9,751,222 B2
Safety-lock folding knife
A lockback folding knife with an extra constraint that keeps the blade from closing on your fingers.
Lapsed, fee not paid5 drawingsTools & Workshop · US 8,505,418 B1
Quick-lock tool extension
An extension bar with a detent ring that locks tool bits at several depths.
Lapsed, fee not paid9 drawingsTools & Workshop · US 11,084,180 B2
Notched brush-cutter blade
A trimmer blade with a raised center and notched, curved cutting edges that bite into thick brush.
Lapsed, fee not paid4 drawingsTools & Workshop · US 11,085,202 B1
Runway light puller
A jack-and-collar tool that pulls airport runway light fixtures out of their pavement cans.
Expired, full term4 drawingsTools & Workshop · US 6,968,757 B1
Coated-pipe turning tool
A tube that threads loosely onto plastic-coated metal pipe and turns it by pressing a friction plate on the pipe's end, sparing the coating.
Expired, full term14 drawingsTools & Workshop · US 6,634,260 B1
Crank-driven lug nut breaker
A socket wrench pulled by a hand-cranked screw and braced on a neighboring lug nut, multiplying torque to free very tight truck lug nuts.
Expired, full term5 drawingsTools & Workshop · US 6,634,844 B2
Thick-panel crossbar fastener
A fastener for thick composite panels, such as a container door and wall, where turning a screw draws a crossbar in to lock them together.
Expired, full term7 drawingsTools & Workshop · US 6,540,472 B2
Panel-flipping work table
A hinged work table that folds in the middle to tip a large panel onto its edge so one or two people can flip it over.
Expired, full term11 drawingsTools & Workshop · US 5,984,287 A
Frame-welding clamp jig
A post-mounted table with pivoting clamps and an overhead arm that hold frame members at precise angles while they are welded.
Likely abandoned4 drawingsTools & Workshop · US 2017/0209986 A1
Ratcheting frame spreader
A ratcheting spreader that pushes two parts of a construction frame apart with controlled force.
Expired, full term3 drawingsTools & Workshop · US 5,918,867 A
Two-axis locking mount
A mounting base with two linked rotating shafts that each turn in several directions and lock, holding a plate that carries the object.
Lapsed, fee not paid8 drawingsTools & Workshop · US 8,657,028 B2
Swing-arm impact hammer
A powered tool whose spinning spindle swings an arm to deliver repeated hammer blows.
Lapsed, fee not paid12 drawingsTools & Workshop · US 11,257,257 B1
Multi-sensor stud finder
A wall scanner that combines sensing modes to detect wood, metal, wires and pipes behind a wall and show them on a display.
Lapsed, fee not paid5 drawingsTools & Workshop · US 11,207,764 B2
Torque-limit socket
A socket with an internal clutch that slips at a set torque so fasteners aren't overtightened.
Lapsed, fee not paid12 drawingsTools & Workshop · US 8,573,106 B2
One-person portable sawmill
A trailer sawmill with powered tines that load and turn the log, so one person can mill boards.
Nothing matches. Loosen a filter or clear the search.